Injection molding cross flow water cooling tower YC-150

Injection molding cross flow water cooling tower YC-150

Industry cooling tower is mainly used for cooling in air conditioning system, frozen series, injection molding, leather, foam, power generation, steam turbine, aluminum processing, air compressors, industrial cooling water and other fields;

Square cooling tower most used for air conditioning cooling, freezing, plastic chemical industry;

Closed circuit cooling tower have the Attractive shape: the Small dimension of shape, the low height of the tower, light weight of tower, and multiform layout in covering the area.

Injection molding cross flow water cooling tower YC-150 details:

Working principle:

1, Working fluid (water, oil or other liquid) flowing inside of the coils, which is enwrapped by spray water on the outside. The heat of water is transferred by the coil and become the saturated vapor when meeting the water and air.

2, the heat is exhausted out of the tower by the tower by the top fan; water is collected back to the bottom tank and circulates continuously. The spray water is cooled down via PVC radiation fin in the process of circulation, and flow is the same direction with the fresh wind. The coil mainly takes sensible heat travel style.

3, the most benefit of this style is can avoid scale formation on the outside of the coil. And this will apply especially to dealing with high-temperature fluid (e.g. 60°C) or the fluid need big temperature difference (e.g. 60°C to 32°C).

Advantages:

1.Low-speed fan to avoid excessive mist into the air.

2.FRP body contains stable materials resisting ultraviolet radiation with a long service life.

3.Filled with round counterflow model film.

4.Rotating pipe distributing model.

5.The structure contains rust-removing and high-strength galvanized steel which can bear corrosion and can be easily assembled.

6.Different types(standard,low-noise,high-temperature and industrial type) to meet your needs.